MAINTENANCE WORK ON CHASSIS AND ENGINE 94
9.41Installing the rear wheel x
Warning
Danger of accidents Reduced braking due to oil or grease on the brake discs.
– Always keep the brake discs free of oil and grease, and clean them with brake cleaner when necessary.
Warning
Danger of accidents No braking effect when operating the rear brake.
– After installing the rear wheel, always operate the footbrake until the pressure point is reached.
–
Checking the rear hub rubber dampers. x ( p. 95)
100269-10
– Remove the bushing . Clean and grease the working surfaces of the bushing and shaft
seal ring .
Long-life grease ( p. 172)
– Clean and grease the thread of the wheel spindle and the nut .
Long-life grease ( p. 172)
– Install the rubber damper and rear sprocket carrier in the rear wheel.
– Place the rear wheel in the swingarm and bring the brake disc on the brake caliper into
contact.
To Next Page
Loading...
Need help?
General
