MAINTENANCE WORK ON CHASSIS AND ENGINE 62
100247-10
– Turn adjusting screw clockwise to the last perceptible click.
– Turn back counterclockwise by the number of clicks corresponding to the shock
absorber type.
Guideline
Rebound damping
Comfort 20 clicks
Standard 15 clicks
Sport 10 clicks
Full payload 10 clicks
Info
Turn clockwise to increase damping, turn counterclockwise to reduce suspension
damping.
9.10Bleeding fork legs
– Lean the motorcycle on the side stand.
100248-10
– Remove bleeder screws briefly.
Any excess pressure escapes from the interior of the fork.
– Mount and tighten bleeder screws.
Info
Carry out this action on both fork legs.
To Next Page
Loading...
Need help?
General
