MAINTENANCE WORK ON CHASSIS AND ENGINE 135
9.78Installing the oil filter x
100204-10
– Insert oil filters and .
– Oil the O-rings of the oil filter cover. Fit the oil filter covers and .
– Mount and tighten the screws.
Guideline
Screw, oil filter cover M5 6 Nm (4.4 lbf ft)
9.79Cleaning the oil screens x
Warning
Danger of scalding Engine oil and gear oil get very hot when the motocycle is driven.
– Wear suitable protective clothing and gloves. If you scald yourself, hold the affected area under cold water immediately.
Warning
Environmental hazard Problem materials cause environmental damage.
– Dispose of oil, grease, filters, fuel, cleaning substances, brake fluid, batteries, etc., according to regulations.
– Place a suitable container under the engine.
To Next Page
Loading...
Need help?
General
