MAINTENANCE WORK ON CHASSIS AND ENGINE 90
100289-01
– Insert the brake pads, insert the bolt and mount the split pin.
– Operate the foot brake lever repeatedly until the brake linings lie on the brake disc and
there is a tight spot.
– Add brake fluid to the MAX mark.
Brake fluid DOT 4 / DOT 5.1 ( p. 167)
– Mount the screw cap with the membrane.
Info
Clean up overflowed or spilt brake fluid immediately with water.
9.38Removing the front wheel x
– Jack up the motorcycle. ( p. 55)
800078-10
– Press the brake caliper by hand on to the brake disc in order to press back the brake
pistons.
To Next Page
Loading...
Need help?
General
