OPERATING THE TRACTOR36
[HST Type]
BRange Gear Shift Lever (L-M-H)
The range gear shift can only be shifted when the tractor
is completely stopped and the speed control pedal is in
the neutral position.
IMPORTANT:
To avoid transmission and shift linkage damage when
shifting:
A Completely stop the tractor using the brake pedals.
A Do not force the range gear shift lever.
A If it is difficult to shift the lever into L, M, or H from
neutral position:
On slopes be sure to set the parking brake before
starting the procedure.
(1) Slightly depress the speed control pedal to rotate
the gears inside of the transmission.
(2) Release the speed control pedal to the neutral
position.
(3) Wait for a moment and then shift the lever.
6. Selecting the Travel Speed.
(1) Front wheel drive lever
(2) Range gear shift lever
(3) Cruise control lever
(4) Speed control pedal
(1) Range gear shift lever (L-M-H) (H) "HIGH"
(M) "MIDDLE"
(L) "LOW"
(N) "NEUTRAL POSITION"
0000012651.book Page 36 Thursday, October 1, 2015 3:53 PM
To Next Page
Loading...
Need help?
General
