OPERATING THE TRACTOR38
BSpeed Control Pedal
To avoid personal injury or death:
A Do not operate if tractor moves on level ground
with foot off of Speed Control Pedal.
A Consult your local KUBOTA Dealer.
Forward Pedal
Depress the speed control pedal with the toe of your right
foot to move forward.
Reverse Pedal
Depress the speed control pedal with the heel of your right
foot to move backward.
A To prevent serious damage to the HST, do not adjust
the stopper bolts.
A When you stand up from the seat with the speed
control pedal stepped on or the cruise control lever
engaged (ON), the engine will stop regardless of
whether the tractor is moving or not. This is because
the tractor is equipped with Operator Presence Control
system (OPC).
BCruise Control Lever
To avoid personal injury or death:
A Pull the cruise control lever completely to the
rear before starting the engine.
A Do not use the cruise control when driving on
the road.
A Be sure to connect both the left and the right
brakes to release the cruise control. The speed
cruise control won't be released with single
brake activation.
Cruise control is designed for tractor operating efficiency
and operator comfort, This device will provide a constant
forward operating speed by mechanically holding the
cruise control lever at the selected position.
C To engage Cruise Control Device
1. The proper forward speed will be maintained if you
apply the cruise control lever at any position.
2. To operate faster than the set speed, depress the
speed control pedal further down in this condition. The
set speed will be resumed if you release the pedal.
C To disengage Cruise Control Device
A Move the lever all the way back and then to "OFF"
position to release the cruise control.
A Depress both brake pedals.
A Cruise control will be disengaged automatically when
both brake pedals are depressed.
A The cruise control device does not disengage when
the individual right or left brake is applied.
A Cruise control device will not operate in reverse.
A Preferably set the cruise control lever, while holding
down the speed control pedal. This makes the setting
smoother.
9. Depress the Speed Control Pedal.
[HST Type]
(1) Speed control Pedal
(2) Stopper bolt
(A) "FORWARD"
(B) "REVERSE"
0000012651.book Page 38 Thursday, October 1, 2015 3:53 PM
To Next Page
General
