Kubota WSM L6060 User Manual

HYDRAULIC SYSTEM
L3560, L4060, L4760, L5060, L5460, L6060, WSM
8-S30
[2] HYDRAULIC CYLINDER
Hydraulic Cylinder Rod Bushing
1. Visually inspect the DX bushings for signs of wear or damage.
(The DX bushing tends to show concentrated wear.)
2. If the DX bushing is worn beyond the alloy portion "A", replace
it.
(Reference)
9Y1210824HYS0037US0
Hydraulic Cylinder I.D.
1. Measure the hydraulic cylinder I.D. with a cylinder gauge.
2. If the cylinder I.D. exceed the allowable limit, replace the
cylinder tube.
9Y1210824HYS0038US0
Hydraulic cylinder rod
bushing
Alloy thickness "A"
0.57 mm
0.022 in.
Hydraulic cylinder I.D.
Factory specification
55.000 to 55.074 mm
2.1654 to 2.1682 in.
Allowable limit
55.100 mm
2.1693 in.
KiSC issued 03, 2016 A

Kubota WSM L6060 Specifications

General

Brand	Kubota
Model	WSM L6060
Category	Tractor
Language	English