Kubota WSM L6060 User Manual

ELECTRICAL SYSTEM
L3560, L4060, L4760, L5060, L5460, L6060, WSM
9-S61
Main Switch at ON Position
1. Turn the main switch "ON" position.
2. Measure the resistance across the B terminal and the AC
terminal.
3. If 0 ohm is not indicated, renew the main switch.
9Y1210824ELS0061US0
Main Switch at START Position
1. Turn and hold the main switch at the "START" position.
2. Measure the resistances across the B terminal and the AC
terminal, and across the B terminal, and the ST terminal.
3. If 0 ohm is not indicated, renew the main switch.
9Y1210824ELS0062US0
(2) Main Switch (CABIN Type)
Connector Voltage
1. Measure the voltage across the connector B terminal and
chassis.
2. If the voltage differs from the battery voltage (11 to 14 V), the
wiring harness is faulty.
9Y1210824ELS0063US0
Main Switch at ACC Position
1. Turn the main switch ACC position.
2. Measure the resistance across the B terminal and the ACC
terminal.
3. If 0 ohm is not indicated, renew the main switch.
9Y1210824ELS0064US0
Main Switch at Key ON Position
1. Turn and hold the main switch at the "ON" position.
2. Measure the resistances across the B terminal and the ACC
terminal, across B terminal and IG1 terminal and B terminal and
IG2 terminal.
3. If 0 ohm is not indicated, renew the main switch.
9Y1210824ELS0065US0
Resistance B terminal – AC terminal 0 Ω
A: Main Switch Side Connector 4C
Resistance
B terminal – AC terminal 0 Ω
B terminal – ST terminal 0 Ω
A: Main Switch Side Connector 4C
Voltage
Connector B terminal –
Chassis
Approx. battery voltage
A: Wire Harness Side Connector 6G
Resistance B terminal – ACC terminal 0 Ω
A: Main Switch Side Connector 6G
Resistance
B terminal – ACC terminal 0 Ω
B terminal – IG1 terminal 0 Ω
B terminal – IG2 terminal 0 Ω
A: Main Switch Side Connector 6G
KiSC issued 03, 2016 A

Kubota WSM L6060 Specifications

General

Brand	Kubota
Model	WSM L6060
Category	Tractor
Language	English