Kubota WSM L6060 User Manual

ELECTRICAL SYSTEM
L3560, L4060, L4760, L5060, L5460, L6060, WSM
9-S87
(13) Parked Regeneration Switch
NOTE
• Firstly check the connector voltage, secondly check the other wires continuity, then finally check the
switch continuity.
9Y1210824ELS0127US0
Connector Voltage
1. Disconnect the connector, and turn the main key switch "ON"
position.
2. Measure the voltage with a voltmeter across the terminals
shown in the table below.
3. If the reference value is not indicated as shown in the table
below, check the relating electric circuit.
9Y1210824ELS0128US0
Switch Continuity
1. Check the continuity across the terminals shown in the table
below.
2. If the continuity specified below is not indicated, the parked
regeneration switch is faulty.
9Y1210824ELS0129US0
Voltage
Main switch at
"ON"
Terminal 1 –
chassis
Approx. battery
voltage
Terminal 3 –
chassis
(1) Parked Regeneration Switch (2) Connector (Harness Side)
Continuity Check
Terminal 1 – 4
Continuity
Terminal 3 – 6
(1) Connector (Switch Side)
KiSC issued 03, 2016 A

Kubota WSM L6060 Specifications

General

Brand	Kubota
Model	WSM L6060
Category	Tractor
Language	English