ELECTRICAL SYSTEM
L3560, L4060, L4760, L5060, L5460, L6060, WSM
9-S75
[12] ENGINE CONTROL SYSTEM
(1) Injector
• When replacing the engine ECU, be sure to do injector correction. (Refer to the "DIAGNOSIS MANUAL"
(9Y120-02420)
9Y1210824ELS0099US0
Injector Resistance
1. Measure the resistance with an ohmmeter across the terminals
shown in the table below.
2. If the reference value is not indicated, the injector wire harness
or injector is faulty.
9Y1210824ELS0100US0
Resistance Terminal 1 – 2 0.215 to 0.295 Ω
(1) Injector
(2) Terminal 1
(3) Terminal 2