Kyocera ECOSYS FS-C8650DN Service Manual

2MN/2N1-1
1-3-33
U034 Adjustment: Leading edge registration adjustment
1. Press the menu key.
2. Press the OK key to output a test pattern.
3. Select the item to be adjusted.
[LSU Out Top]
(L): When large size paper is used (218 mm or more in width of paper).
(S): When small size paper is used.
[LSU Out Top B/W] [LSU Out Top 3/4]
(L): When large size paper is used (218 mm or more in width of paper).
(S): When small size paper is used.
Item No. Description
Display Description
Setting
range
Initial
setting
Change in
value per step
MPT(L) Paper feed from MP tray -3.0 to 3.0 0 0.1 mm
MPT Half(L) Paper feed from MP tray -3.0 to 3.0 0 0.1 mm
Cass(L) Paper feed from cassette -3.0 to 3.0 0 0.1 mm
Cass
Half(L)
Paper feed from cassette -3.0 to 3.0 0 0.1 mm
Dup(L) Duplex mode (second) -3.0 to 3.0 0 0.1 mm
Dup Half(L) Duplex mode (second) -3.0 to 3.0 0 0.1 mm
MPT(S) Paper feed from MP tray -3.0 to 3.0 0 0.1 mm
MPT
Half(S)
Paper feed from MP tray -3.0 to 3.0 0 0.1 mm
Cass(S) Paper feed from cassette -3.0 to 3.0 0 0.1 mm
Cass
Half(S)
Paper feed from cassette -3.0 to 3.0 0 0.1 mm
Dup(S) Duplex mode (second) -3.0 to 3.0 0 0.1 mm
Dup Half(S) Duplex mode (second) -3.0 to 3.0 0 0.1 mm
Display Description
Setting
range
Initial
setting
Change in
value per step
MPT(L) Paper feed from MP tray -3.0 to 3.0 0 0.1 mm
Cass(L) Paper feed from cassette -3.0 to 3.0 0 0.1 mm
Dup(L) Duplex mode (second) -3.0 to 3.0 0 0.1 mm
MPT(S) Paper feed from MP tray -3.0 to 3.0 0 0.1 mm
Cass(S) Paper feed from cassette -3.0 to 3.0 0 0.1 mm
Dup(S) Duplex mode (second) -3.0 to 3.0 0 0.1 mm

Kyocera ECOSYS FS-C8650DN Specifications

General

Brand	Kyocera
Model	ECOSYS FS-C8650DN
Category	Printer
Language	English