2MN/2N1
1-3-70
U131 Setting: [Mode]
1. Select the item to be set.
Initial setting: Auto
2. Press the OK key. The value is set.
Completion
Press the Back key. The screen for selecting a maintenance item No. is displayed.
U132 Replenishing toner forcibly
Description
Replenishes toner forcibly until the toner sensor output value reaches the toner feed start level.
Purpose
Used when the toner empty is detected frequently.
Method
1. Press the OK key.
2. Select [Execute].
3. Press the OK key.
Toner is replenished until the toner sensor output value reaches the toner feed start level.
4. To stop operation, press the Back key.
Completion
Press the Back key. The screen for selecting a maintenance item No. is displayed.
Item No. Description
Display Description
Manual Toner sensor control voltage manual adjustment
Auto Toner sensor control voltage auto adjustment
Display Description
Supply(C) Toner feed start level (cyan)
Supply(M) Toner feed start level (magenta)
Supply(Y) Toner feed start level (yellow)
Supply(K) Toner feed start level (black)
Sensor(C) Toner sensor output value (cyan)
Sensor(M) Toner sensor output value (magenta)
Sensor(Y) Toner sensor output value (yellow)
Sensor(K) Toner sensor output value (black)
Excute
To Next Page
Loading...
Need help?
General