2MN/2N1
2-2-10
(5) Others
Figure 2-2-5 Others
1. Paper feed clutch 1 (PFCL1) ................ Primary paper feed from cassette 1.
2. Paper feed clutch 1 (PFCL1) ................ Primary paper feed from cassette 2.
3. Assist clutch 1 (ASCL1) ........................ Controls the drive of the assist roller.
4. Assist clutch 2 (ASCL2) ........................ Controls the drive of the assist roller.
5. Paper conveying clutch (PCCL)............ Controls the drive of vertical conveying section.
6. MP paper feed clutch (MPPFCL) .......... Controls primary paper feed from the MP tray.
7. Pickup solenoid 1 (PUSOL1) ................ Controls the pickup roller (cassette 1).
8. Pickup solenoid 2 (PUSOL2) ................ Controls the pickup roller (cassette 2).
9. Feedshift solenoid (FSSOL).................. Controls the feedshift guide.
10. Cleaning solenoid (CLSOL) .................. Controls the ID sensor cleaning.
11. Cleaning lamp K (CL-K) ........................ Eliminates the residual electrostatic charge on the drum (black).
12. Cleaning lamp M (CL-M)....................... Eliminates the residual electrostatic charge on the drum
(magenta).
13. Cleaning lamp C (CL-C)........................ Eliminates the residual electrostatic charge on the drum (cyan).
14. Cleaning lamp Y (CL-Y) ........................ Eliminates the residual electrostatic charge on the drum (yellow).
15. Fuser IH (FIH) ....................................... Heats the heat roller (fuser belt).
16. Fuser thermostat (FTS)......................... Prevents overheating of the heat roller (fuser belt).
14 13 12
18
17
11
16
9
15
6
1
2
5
4
3
10
7
8
19
Machine inside
Machine front
Machine rear
To Next Page
Loading...
Need help?
General