2MN/2N1
1-4-41
2640 SD paper feed motor error
(side deck)
After SD paper feed motor is
driven, the ready signal does
not turn to L within 2 s.
Defective connec-
tor cable or poor
contact in the con-
nector.
Reinsert the connector. Also check for conti-
nuity within the connector cable. If none,
replace the cable.
SD paper feed motor and SD main PWB
(YC16)
Defective drive
transmission sys-
tem of motor.
Check if the gears rotate smoothly. If not,
grease the bushes and gears. Check for
broken gears and replace if any.
Defective SD
paper feed motor.
Replace the SD paper feed motor.
Defective SD main
PWB.
Replace the SD main PWB (Refer to the ser-
vice manual for the paper feeder).
2650 SM paper feed motor error
(side multi tray)
After SM paper feed motor is
driven, the ready signal does
not turn to L within 2 s.
Defective connec-
tor cable or poor
contact in the con-
nector.
Reinsert the connector. Also check for conti-
nuity within the connector cable. If none,
replace the cable.
SM paper feed motor and SM main PWB
(YC5)
Defective drive
transmission sys-
tem of motor.
Check if the gears rotate smoothly. If not,
grease the bushes and gears. Check for
broken gears and replace if any.
Defective SM
paper feed motor.
Replace the SM paper feed motor.
Defective SM main
PWB.
Replace the SM main PWB (Refer to the
service manual for the paper feeder).
2660 PF paper feed motor error
(side large capacity feeder)
After PF paper feed motor is
driven, the ready signal does
not turn to L within 2 s.
Defective connec-
tor cable or poor
contact in the con-
nector.
Reinsert the connector. Also check for conti-
nuity within the connector cable. If none,
replace the cable.
PF paper feed motor and PF main PWB
(YC16)
Defective drive
transmission sys-
tem of motor.
Check if the gears rotate smoothly. If not,
grease the bushes and gears. Check for
broken gears and replace if any.
Defective PF paper
feed motor.
Replace the PF paper feed motor.
Defective PF main
PWB.
Replace the PF main PWB (Refer to the ser-
vice manual for the paper feeder).
Code Contents Causes
Check procedures/
corrective measures