2MN/2N1-1
1-3-106
U252 Setting the destination
Description
Switches the operations and screens of the machine according to the destination.
Purpose
To be executed after initializing the backup RAM, in order to return the setting to the value before
replacement or initialization.
Method
1. Press the OK key.
2. Select the destination.
3. Press the OK key.
4. Exit the maintenance mode, perform shut-down, and turn the main power switch to off and on
again. Allow more than 5 seconds between Off and On.
* : An error code is displayed in case of an initialization error.
When errors occurred, turn main power switch off then on, and execute initialization using
maintenance item U252.
Item No. Description
Display Description
Japan Metric Metric (Japan) specifications
Inch Inch (North America) specifications
Europe Metric Metric (Europe) specifications
Asia Pacific Metric (Asia Pacific) specifications
Australia Australia specifications
China China specifications
Korea Korea specifications
To Next Page
Loading...
Need help?
General