2MN/2N1
1-4-22
5111 BR eject sensor stay jam BR eject sensor (BRES) does not turn off during paper
feed from cassette 1.
G
5112 BR eject sensor (BRES) does not turn off during paper
feed from cassette 2.
G
5113 BR eject sensor (BRES) does not turn off during paper
feed from cassette 3 (paper feeder/large capacity
feeder).
G
5114 BR eject sensor (BRES) does not turn off during paper
feed from cassette 4 (paper feeder/large capacity
feeder).
G
5115 BR eject sensor (BRES) does not turn off during paper
feed from cassette 5 (side multi tray/side deck).
G
5116 BR eject sensor (BRES) does not turn off during paper
feed from cassette 6 (side paper feeder/side large
capacity feeder).
G
5117 BR eject sensor (BRES) does not turn off during paper
feed from cassette 7 (side paper feeder/side large
capacity feeder).
G
5118 BR eject sensor (BRES) does not turn off during paper
feed from duplex section.
G
5119 BR eject sensor (BRES) does not turn off during paper
feed from MP tray.
G
6000 DF paper entry error DF paper entry sensor (DFPES) turns on before the
eject signal is output from the machine (4000-sheet fin-
isher).
H
6001 DF paper entry sensor (DFPES) turns on before the
eject signal is output from the machine (1000-sheet fin-
isher).
H
6020 DF front cover open DF front upper cover is opened during operation
(4000-sheet finisher).
H
6021 DF front cover is opened during operation (1000-sheet
finisher).
H
6041 DF top cover open DF top cover is opened during operation (1000-sheet
finisher).
H
6050 CF eject cover open CF eject cover is opened during operation (4000-sheet
finisher).
H
6060 MB cover open MB cover is opened during operation (4000-sheet fin-
isher).
H
6070 Center folding unit open Center folding unit is opened during operation (4000-
sheet finisher).
H
6080 CF left guide open CF left guide is opened during operation (4000-sheet
finisher).
H
Code Contents Conditions
Jam
location*
*: Refer to figure 1-4-1 for paper misfeed indication (see page 1-4-1).
To Next Page
Loading...
Need help?
General