2MN/2N1-1
1-3-126
U468 Completion
Press the Back key. The screen for selecting a maintenance item No. is displayed.
U469 Adjusting the color registration
Description
Performs the color registration correction and transfer belt speed correction.
Purpose
To perform when replacing the transfer belt unit or laser scanner unit.
Method
* : Before excuting this mode, the U464 Calib mode must be executed.
1. Press the OK key.
2. Select the item.
3. Press the OK key.
Method: [Manual]
1. Select [Print].
2. Press the OK key. A chart for adjustment is outputted.
Figure 1-3-14
3. Select [Regist].
4. Read figures at MH-1 to 7/CH-1 to 7/YH-1 to 7 and MV-3/CV-3/YV-3 of the reference chart
and enter the figure marked at the scale which the BK fine line is in line with the M/C/Y fine
lines, using the cursor and 10 keys.
Item No. Description
Display Description
Manual Executing the manual color registration correction
Belt Initialize Executing the transfer belt speed correction
Belt Check Confirmation of transfer belt position
Chart for adjustment
(example)
When a red bar exactly coincides
with B, enter B as a value.
To Next Page
Loading...
Need help?
General