Kyocera ECOSYS FS-C8650DN Service Manual

2MN/2N1-1
1-3-37
U051 Adjusting the deflection in the paper
Description
Adjusts the deflection in the paper at the registration roller.
Purpose
Make the adjustment if the leading edge of the print image is missing or varies randomly, or if the
print paper is Z-folded.
Method
1. Press the OK key.
2. Select the item to be adjusted.
*: 55 ppm model only.
Adjustment
1. Select the item to be adjusted.
[Paper Loop Amount]
Change in value per step: 1.0 mm
(L): When large size paper is used (218 mm or more in width of paper).
(S): When small size paper is used.
Item No. Description
Display Description
Loop Amount Deflection adjustment
Loop Amount B/W* Deflection adjustment in black and white mode
Loop Amount 3/4 Deflection adjustment at 3/4 times of line speed
Display Description
Setting
range
Initial setting
45ppm 55ppm
MPT(L) Paper feed from MP tray -30 to 20
-5 -7
MPT H(L) Paper feed from MP tray -30 to 20
0-1
Cass(L) Paper feed from cassette -30 to 20
-5 -7
Cass H(L) Paper feed from cassette -30 to 20
0-1
Dup(L) Duplex mode (second) -30 to 20
-5 -7
Dup H(L) Duplex mode (second) -30 to 20
0-1
MPT(S) Paper feed from MP tray -30 to 20
-5 -7
MPT H(S) Paper feed from MP tray -30 to 20
0-1
Cass(S) Paper feed from cassette -30 to 20
-6 -8
Cass H(S) Paper feed from cassette -30 to 20
-1 -2
Dup(S) Duplex mode (second) -30 to 20
-5 -7
Dup H(S) Duplex mode (second) -30 to 20
0-1

Kyocera ECOSYS FS-C8650DN Specifications

General

Brand	Kyocera
Model	ECOSYS FS-C8650DN
Category	Printer
Language	English