vi
Introduction
The Kyocera Mita printer has many advanced features, such
as the EcoPrint function that reduces the power consumption
and the Auto Media Type Selection function that selects the
media automatically before printing. If you install an optional
document finisher to the printer, you can also make stitching.
This section explains the following topics:
•For More Information...
•Guide to the Operation Guide
This Operation Guide has the following chapters:
Chapter 1 Names of Parts
This chapter explains the name and function of each part of
the printer.
Chapter 2 Handling Paper
This chapter explains the type of paper that can be used with
this printer, and how to load paper into the paper cassette
and MP tray.
Chapter 3 Using the Operator Panel
This chapter explains the message display, indicators and
keys on the operator panel, and how to make various settings
from the operator panel.
Chapter 4 Troubleshooting
This chapter explains how to handle printer problems that
may occur, such as paper jams.
Chapter 5 Maintenance
This chapter explains how to replace the toner container,
waste toner box, and how to care for your printer.
Chapter 6 Fonts
This appendix explains about fonts and lists the printer’s in-
ternal fonts.
Appendix A Option Units
This appendix explains how to expand the printer’s memory.
This appendix introduces the available options for use with
the printer.
Appendix B Host Computer Interface
This appendix explains the pin assignment and specifications
for the printer’s parallel interface and serial interface.
Appendix C Specifications
This appendix lists the printer’s specifications.
Glossary
This glossary explains the terminology used in this manual.
1. For More Information...
Item
Description
DescriptionDescription
Description
Installation Guide
(paper manual)
Describes procedures such as
printer setup and printing a
test page.
Operation Guide
(this manual)
Guides you through topics
concerning the operations and
maintenance of the printer.
Printer Driver Guide Describes how to install and
set up the printer driver. This is
contained in the latter half of
this guide.
PRESCRIBE
Commands Technical
Reference
PRESCRIBE is the native
language of the Kyocera Mita
printers. This Technical Ref-
erence contains the informa-
tion about how the printing
is performed using the PRE-
SCRIBE commands as well
as the font and emulation de-
scription. Also included is a
list of permanent parameters
and their
explanation needed
when customizing your print-
er.
PRESCRIBE Commands
Command Reference
Gives a detailed explanation of
the PRESCRIBE command
syntax and parameters.
2. Guide to the Operation Guide
To Next Page
Loading...
Need help?
General
Weight and Dimensions
