Kyocera KM-3050 User Manual

FAX Operation (Advanced)
4-52 OPERATION GUIDE
8
Press [OK].
9
Press [OK].
10
Press the Start key. Transmission begins.

Kyocera KM-3050 Specifications

Power

voltage	120V
frequency	60Hz
current	11.5A

System Memory

standard RAM	512MB
maximum RAM	1GB
hard drive capacity	80GB

Output Speeds

warm-up time	Within 30 Seconds
first copy out time	3.9 Seconds
pages per minute (letter)	30

Weight and Dimensions

width	23.6"
depth	25.4"
height	29.3"
weight	188 lbs

Summary

Part Names and Functions

Preparation Before Use

FAX Operation (Basic)

Automatic Send and Reception

Explains basic fax sending using keys and automatic reception.

Communication Control

Provides methods to cancel transmissions and redial numbers.

FAX Operation (Advanced)

Transmission Modes

Details delayed, broadcast, interrupt send, chain dial, and manual operations.

Special Reception and Forwarding

Covers manual reception, remote switch, memory forwarding, and FAX boxes.

Communication Protocols and Management

Explains sub address, polling, account management, and program dial features.

Setup and Registration

Internet Faxing (i-FAX)

i-FAX Overview and Network Settings

Explains i-FAX and details necessary SMTP/POP3 server configuration via Command Center.

i-FAX Transmission and Reception Procedures

Guides on sending and receiving faxes over the Internet.

About Network FAX

Network FAX Functionality and Setup

Troubleshooting

Operational Indicators and Power Precautions

Error Messages and Problem Resolution

Lists common error messages and provides a guide to resolve operational problems.