Kyocera KM-3050 User Manual

FAX Operation (Advanced)
OPERATION GUIDE 4-5
4
Broadcast Transmission
This function allows you to send the same originals to several destinations
in one operation. The machine stores (memorizes) originals to send in
memory temporarily, and automatically repeats dialing and transmission to
the set destination afterwards.
NOTE: When using a group for the destination, you can send originals to
up to 500 destinations in one operation.
You can use this function together with sub address communication and
delayed transmission.
When direct transmission has been selected, it changes to memory
transmission at the time of transmission.
1
Press the Send/FAX key.
2
Place the originals.
3
Select the destination.
Enter the fax number
1 Press [FAX No. Entry], and use the numeric keys to enter the fax
number. Press [Next Dest.] to enter the next fax number.
2 After entering all the destinations, press [OK].
Enter the i-FAX address
1 Press [i-FAX Addr Entry].
2 Press [i-FAX Address], enter the i-FAX address and then press [OK].
Press [Next Dest.] to enter the next i-FAX address.
3 After entering all the destinations, press [OK].
Select the destination from the Address Book
1 Press [Address Book].
2 Select the check boxes beside the destinations to select from the list.
3 Press [OK].
Select the destination from the One-touch keys
Press all the One-touch keys to which necessary destinations are
registered.

Kyocera KM-3050 Specifications

Power

voltage	120V
frequency	60Hz
current	11.5A

System Memory

standard RAM	512MB
maximum RAM	1GB
hard drive capacity	80GB

Output Speeds

warm-up time	Within 30 Seconds
first copy out time	3.9 Seconds
pages per minute (letter)	30

Weight and Dimensions

width	23.6"
depth	25.4"
height	29.3"
weight	188 lbs