Kyocera KM-3050 User Manual

OPERATION GUIDE Appendix-5
Specifications
NOTE: Specifications are subject to change without notice.
Item Description
Type Optional FAX kit
Compatibility G3
Communication Line Subscriber telephone line
Transmission Time 3 seconds or less (33600 bps, JBIG, ITU-T A4-R #1 chart)
Transmission Speed 33600/31200/28800/26400/24000/21600/19200/16800/14400/12000/9600/
7200/4800/2400 bps
Coding Scheme JBIG/MMR/MR/MH
Error Correction ECM
Original Size Max. width: 11"/297 mm, Max. length: 63"/1,600 mm
Automatic Document Feed Max. 100 sheets (with optional document processor)
Scanner Resolution Horizontal × Vertical
200 × 100 dpi Normal (8 dot/mm × 3.85 line/mm)
200 × 200 dpi Fine (8 dot/mm × 7.7 line/mm)
200 × 400 dpi Super Fine (8 dot/mm × 15.4 line/mm)
400 × 400 dpi Ultra Fine (16 dot/mm × 15.4 line/mm)
600 × 600 dpi
Printing Resolution 600 × 600 dpi
Gradations 256 shades (Error diffusion)
One-Touch Key 100 keys
Multi-Station Transmission Max. 500 destinations
Substitute Memory Reception 700 sheets or more (when using ITU-T A4 #1)
Image Memory Capacity Built-in hard disk (120 MB used for memory forwarding)
Fax board (12 MB) (for memory reception of incoming faxed originals)
Report Output Sent result report, FAX RX result report, Activity report, Status page
Option FAX Backup Kit, Dual FAX

Kyocera KM-3050 Specifications

Power

voltage	120V
frequency	60Hz
current	11.5A

System Memory

standard RAM	512MB
maximum RAM	1GB
hard drive capacity	80GB

Output Speeds

warm-up time	Within 30 Seconds
first copy out time	3.9 Seconds
pages per minute (letter)	30

Weight and Dimensions

width	23.6"
depth	25.4"
height	29.3"
weight	188 lbs