Kyocera KM-3050 User Manual

FAX Operation (Advanced)
4-2 OPERATION GUIDE
Long Originals
Use the optional document processor to scan long originals (originals that
are longer in the paper feeding direction).
NOTE: To send 2-sided originals, select [Off] (scan as standard size).
(Refer to 1-sided / 2-sided Selection on page 4-68.)
Originals of up to 1,600 mm/63" long can be scanned.
1
Press the Send/FAX key.
2
Place the originals in the optional document processor.
3
Press [Type of Original/Transmission], and then [Long Original].
4
To scan standard
size originals, press
[Off], and to scan
long originals, press
[On].
5
Press [OK].
6
Set the destination, and press the Start key. Transmission begins.
Status
Enter Destination.
Cancel OKAdd Shortc ut
Ready to send.
OnOff
Long Original
Destination
Read long-sized original documents
using a docum ent process or.
0
10/10/2007 10:00
Press [OK] to display
the image.

Kyocera KM-3050 Specifications

Power

voltage	120V
frequency	60Hz
current	11.5A

System Memory

standard RAM	512MB
maximum RAM	1GB
hard drive capacity	80GB

Output Speeds

warm-up time	Within 30 Seconds
first copy out time	3.9 Seconds
pages per minute (letter)	30

Weight and Dimensions

width	23.6"
depth	25.4"
height	29.3"
weight	188 lbs