Kyocera KM-3050 User Manual

Setup and Registration
OPERATION GUIDE 6-11
6
Reception Date/Time
Reception Date/Time function adds the reception date/time, sender
information and number of pages on the top of each page when the
message is printed out. It is useful for confirming the time of reception if the
fax is from a different time zone.
NOTE: When the received data is printed on multiple pages, the
reception date/time is printed on the fist page only. It is not printed on the
pages that follow.
When the received fax data is forwarded after retrieving it from memory,
the reception date/time is not added to the forwarded data.
1
Press the System Menu key.
2
Press [FAX/i-FAX], [Next] of Reception, [Next] of Basic and then [Change]
of Reception Date/Time.
3
Press [On].
4
Press [OK].
5
To exit from this setup, press [Close] several times until the System Menu
default screen is displayed.
Status
FAX - Reception Date /Time
Add a rec eption date /ti me to f axes before printi ng.
Cancel OK
10/10/2007 10:00
OnOff

Kyocera KM-3050 Specifications

Power

voltage	120V
frequency	60Hz
current	11.5A

System Memory

standard RAM	512MB
maximum RAM	1GB
hard drive capacity	80GB

Output Speeds

warm-up time	Within 30 Seconds
first copy out time	3.9 Seconds
pages per minute (letter)	30

Weight and Dimensions

width	23.6"
depth	25.4"
height	29.3"
weight	188 lbs