Kyocera KM-3050 User Manual

FAX Operation (Basic)
3-22 OPERATION GUIDE
Group Registration
You can register several destinations that have been registered to be
contacted as a unit. This method is convenient because several
destinations can be designated at one time. Up to 500 groups can be
registered.
NOTE: Group registration requires destinations that have been
registered as contact registration. Perform the necessary contact
registration in advance.
1
Press the System Menu key.
2
Press [Edit Destination], [Register/Edit] of Address Book, [Add], [Group],
and then [Next].
3
Press [Change] of
Address Number.
4
Use the numeric keys or [+]/[-] to enter the address number (0001 to
2,500).
NOTE: The address a number is the identification number for each
group. You can select a number available from a total of 2,500 numbers
for registration - 2,000 numbers for contact registration and 500 numbers
for group registration.
When ‘0000’ is displayed, an available number is automatically assigned.
5
Press [OK].
6
Press [Change] of Name.
7
Enter the group name to be displayed on the Address Book, and press
[OK]. Up to 32 characters can be entered.
NOTE: For details on character entry, refer to Character Entry Method on
page 2 of the Appendix.
8
Press [Group Member].
Status
Group Name
Back Register
Address Number:
10/10/2007 10:00
Group Member
Name:
Change
Change
Cancel
Auto
Addres s:

Kyocera KM-3050 Specifications

Power

voltage	120V
frequency	60Hz
current	11.5A

System Memory

standard RAM	512MB
maximum RAM	1GB
hard drive capacity	80GB

Output Speeds

warm-up time	Within 30 Seconds
first copy out time	3.9 Seconds
pages per minute (letter)	30

Weight and Dimensions

width	23.6"
depth	25.4"
height	29.3"
weight	188 lbs