Kyocera KM-3050 User Manual

FAX Operation (Advanced)
OPERATION GUIDE 4-53
4
Program Dial
You can register transmission requirements such as the other party to
which you send originals and transmission time as a program. After
registration, you can recall transmission requirements only by pressing the
program number. Also, you can assign names to programs to make
recalling programs easier and more convenient.
NOTE: The copy function can be also registered to the program. Up to 50
programs including copying and sending functions can be registered.
When user login has been enabled, only the administrator can register.
Registering Programs
1
Transmission requirements have been registered, press the Program key.
2
Press [Register].
3
Press the program number to be registered (1 to 50).
To register using the Send screen or Copy screen, go to the step 5.
NOTE: When selecting a program number that has been registered, you
can replace the currently set function with the function represented by the
program number.
4
Press [Send] and then [Next].
5
Enter the program name, and press [Register]. The program is registered.
NOTE: For details on character entry, refer to Character Entry Method on
page 2 of the Appendix.
Changing/Deleting Registration Contents
You can change program numbers and program names, or delete
programs.
1
Press the Program key.
2
Press [Edit] and press the key of the program number to be changed or
deleted (1 to 50).

Kyocera KM-3050 Specifications

Power

voltage	120V
frequency	60Hz
current	11.5A

System Memory

standard RAM	512MB
maximum RAM	1GB
hard drive capacity	80GB

Output Speeds

warm-up time	Within 30 Seconds
first copy out time	3.9 Seconds
pages per minute (letter)	30

Weight and Dimensions

width	23.6"
depth	25.4"
height	29.3"
weight	188 lbs