Kyocera KM-3050 User Manual

Preparation Before Use
2-4 OPERATION GUIDE
Setting the TTI information
Register the name (local FAX name), fax number, and local FAX ID printed
in the transmit terminal identification (TTI) area.
By registering the TTI data, the receiver can easily find out where the FAX
came from.
Local FAX Name Registration
Register the local FAX name printed on in the transmit terminal
identification.
NOTE: To change the entry, follow the same operation.
1
Press the System Menu key.
2
Press [FAX/i-FAX], [Next] of Transmission, [Next] of Basic, and then
[Change] of Local FAX Name Entry. The entry screen will be displayed.
3
Enter the Local FAX
Name to be
registered. Up to 16
characters can be
entered.
NOTE: For details on character entry, refer to Character Entry Method on
page 2 of the Appendix.
4
Press [OK].
5
To exit from this setup, press [Close] several times until the System Menu
default screen is displayed.
Local FAX Information Entry
Register the local FAX information (local FAX number/ID) printed on in the
transmit terminal identification (TTI) area. The Local FAX ID is used for
transmission limit purposes. (Refer to Transmission Restriction on page 6-
16.)
NOTE: If you install the Dual FAX option and then use 2 phone lines, you
can register Local Fax Numbers for each of the lines.
To change the registration contents, follow the same operation.
Us e th e keyb oard to enter.
Limit: ch aracters
Backspace
z
Lower-case No./Symbol Space
Cancel OK
xcvbnm . /
;l
,
·kjhfdgsa
po[iuyretwq ]
09-87643521 =`
Upper-case
Status
6/6/2006 10:00
Inp ut: characters0
16
Local FAX Name Entry
LKIJ

Kyocera KM-3050 Specifications

Power

voltage	120V
frequency	60Hz
current	11.5A

System Memory

standard RAM	512MB
maximum RAM	1GB
hard drive capacity	80GB

Output Speeds

warm-up time	Within 30 Seconds
first copy out time	3.9 Seconds
pages per minute (letter)	30

Weight and Dimensions

width	23.6"
depth	25.4"
height	29.3"
weight	188 lbs