Kyocera KM-3050 User Manual

FAX Operation (Advanced)
OPERATION GUIDE 4-13
4
1 Press the
Status/Job
Cancel key.
2 Press [Device/
Communication ],
and then
[Manual RX].
Reception will
start.
NOTE: When using a telephone set that can send tone signals, use the
telephone to start the reception of originals with the remote switch
function. (Refer to Remote Switch Function on page 4-14.)
When you hear a voice from the receiving system
The telephone line has connected to the telephone of the sending system.
When the conversation is over, follow steps 1 to 2 above.
After the sending system has started transmission, the machine starts
receiving originals.
4
When reception starts (when the Receive indicator on the operation panel
starts blinking), return the handset to its original position.
30/40/50 ppm model 25/30 ppm model
Status
Status
Ready .
Device /
Comm unic ation
Paper /Supplies
10/10/2007 10:00
Scanner
Ready .
Printer
Not connected.
Removable Memory
Hard Dis k
Not connected.
Memory Card
Storing JobsSending JobsPrint ing Jobs
Format Remove
Line Off Manual RX
FAX Line 1
Log
Format Printing list
FAX
Ready .
Check New FAXFAX/i-FAX

Kyocera KM-3050 Specifications

Power

voltage	120V
frequency	60Hz
current	11.5A

System Memory

standard RAM	512MB
maximum RAM	1GB
hard drive capacity	80GB

Output Speeds

warm-up time	Within 30 Seconds
first copy out time	3.9 Seconds
pages per minute (letter)	30

Weight and Dimensions

width	23.6"
depth	25.4"
height	29.3"
weight	188 lbs