2. Verify that the power connectors to the GPU are
connected firmly. Then power cycle the system.
3. Run nvidia-smi -q In some cases this will report a
poorly connected power cable.
4. Rerun the diagnostics, using the same GPU, on
system that is known to be working. A variety of
system issues can cause diagnostic failure.
5. If the problem remains, contact your IBM
technical-support representative.
Related Links:
v IBM Support Website
v Latest level of DSA
v Latest level of BMC/IMM
409-905-000 Nvidia::DiagnosticServiceProvider::Matrix
Test Failed
Explanation: Nvidia GPU Matrix Test Failed.
Severity: Error
Serviceable: Yes
Recoverable: No
Automatically notify Support: No
User response: Complete the following steps:
1. Verify that the GPU is seated in the PCIe slot
correctly by reseating the GPU. Then power cycle
the system.
2. Verify that the power connectors to the GPU are
connected firmly. Then power cycle the system.
3. Run nvidia-smi -q In some cases this will report a
poorly connected power cable.
4. Rerun the diagnostics, using the same GPU, on
system that is known to be working. A variety of
system issues can cause diagnostic failure.
5. If the problem remains, contact your IBM
technical-support representative.
Related Links:
v IBM Support Website
v Latest level of DSA
v Latest level of BMC/IMM
409-906-000 Nvidia::DiagnosticServiceProvider::Binomial
Test Failed
Explanation: Nvidia GPU Binomial Test Failed.
Severity: Error
Serviceable: Yes
Recoverable: No
Automatically notify Support: No
User response: Complete the following steps:
1. Verify that the GPU is seated in the PCIe slot
correctly by reseating the GPU. Then power cycle
the system.
2. Verify that the power connectors to the GPU are
connected firmly. Then power cycle the system.
3. Run nvidia-smi -q In some cases this will report a
poorly connected power cable.
4. Rerun the diagnostics, using the same GPU, on
system that is known to be working. A variety of
system issues can cause diagnostic failure.
5. If the problem remains, contact your IBM
technical-support representative.
Related Links:
v IBM Support Website
v Latest level of DSA
v Latest level of BMC/IMM
DSA optical drive test results
The following messages can result when you run the optical drive test.
215-000-000 Optical Drive Test Passed
Explanation: Optical Drive Test Passed.
Severity: Event
Serviceable: No
Recoverable: No
Automatically notify Support: No
Related Links:
v IBM Support Website
v Latest level of DSA
v Latest level of BMC/IMM
215-801-000 Optical Drive Test Aborted
Explanation: Optical Drive Test Aborted. Unable to
communicate with driver.
Severity: Warning
Serviceable: Yes
Recoverable: No
Automatically notify Support: No
User response: Complete the following steps:
1. Make sure that the DSA Diagnostic code is at the
latest level.
2. Run the test again.
3. Check the drive cabling for loose or broken
connections at both ends or damage to the cable.
Replace the cable if damage is present.
4. Run the test again.
409-905-000 • 215-801-000
Appendix C. DSA diagnostic test results 585
To Next Page
Loading...
Need help?
General