Lenze C 750 User Manual

2 Safety instrucons
Disregarding the following basic safety measures and safety informaon may lead to severe
personal injury and damage to property!
Observe all specicaons of the corresponding documentaon supplied. This is the
precondion for safe and trouble-free operaon and for obtaining the product features
specied.
Please observe the specic safety informaon in the other secons!
2.1 Basic safety instrucons
Product
•
The product must only be used as directed.
•
Never commission the product in the event of visible damage.
•
The product must never be technically modied.
•
Never commission the product before assembly has been completed.
•
The product must never be operated without required covers.
•
Connect/disconnect all pluggable terminals only in de-energized condion.
•
Only remove the product from the installaon in the deenergized state.
Personnel
Only qualied and skilled personnel are allowed to work with the product. IEC 60364 and/or
CENELEC HD 384 dene the qualicaons of these persons as follows:
•
They are familiar with the installaon, mounng, commissioning, and operaon of the
product.
•
They possess the appropriate qualicaons for their tasks.
•
They are familiar with all regulaons for the prevenon of accidents, direcves, and laws
applicable at the locaon and are able to apply them.
Product
The product must never be technically modied!
If you carry out any technical modicaons or alteraons that are impermissible, all your
warranty claims will become void and the product liability will be excluded!
Device protecon
•
The maximum test voltage for insulaon tests between a control potenal of 24 V and PE
must not exceed 110 V DC (EN 61800−5−1).
2.2 Applicaon as directed
The product is a piece of electrical equipment. The product is solely suited to be installed in
control cabinets or similar closed electrical operang areas, and to implement control
concepts, operaonal concepts, or to represent informaon in customary industrial and
commercial areas.
For the purpose of prevenng injury to persons and damage to material assets, higher-level
safety systems have to be used!
Safety instrucons
Basic safety instrucons
9

Lenze C 750 Specifications

General

Brand	Lenze
Model	C 750
Category	Controller
Language	English