contents and applications.
Setting a Wired Network
If the Network Is Not Automatically Connected
Some models may not be supported.
Setting a Wireless Network
Connect the LAN port of the TV and the router using a LAN cable.
The router should be connected to the Internet beforehand.
If the router supports DHCP, the TV is automatically connected to the network when
you connect the TV to the network with a LAN cable.
01
Press the button on the remote control.02
Select General Network Wired Connection (Ethernet).
To see the details, refer to Setting a Wired Network in Settings Network in the
User Guide.
03
To Next Page
Loading...
Need help?
General
