Some models may not be supported.
To Use the Signal Test
General Programmes Programme Tuning (Programme Tuning &
Settings) Signal Test
Shows the MUX and Service information etc.
Signal test is only available in Antenna or Cable mode.
Some models may not be supported.
Edit Programmes
You can edit the selected programmes from all the stored programmes or add/delete
them to/from the favourite programmes.
Edit All Programmes List
General Programmes Programme Manager Edit All Programmes
You can lock or unlock the selected programmes from all the stored programmes, or you
can set them to be skipped when switching programmes.
Lock / Unlock : Lock the selected programmes or unlock the locked programmes.
Skip / Restore : Set the selected programmes to be skipped when switching
programmes, or disable the skipping option of the programmes previously set to be
skipped.
Move : Move the selected programmes.
Edit Programme Numbers : Change the numbers of the selected programmes.
Delete : Delete the selected programmes.
Set the sorting option.
To Next Page
Loading...
Need help?
General
