While using HbbTV service, navigation keys and the Wheel (OK) button may be disabled if
the Magic Remote’s pointer is activated on the screen. In this case, press the left, right, up
and down keys in order to deactivate the pointer. (This only applies to models that support
the Magic Remote.)
CI Information
CI Information
You can view information about the currently connected CI.
General Programmes CI Information
If you use a CI module or CAM module,
This function enables you to watch some encrypted services (pay services).
●
If you remove the CI Module, you cannot watch pay services.
●
CI (Common Interface) functions may not be possible depending upon the country
broadcasting circumstances.
●
When the module is inserted into the CI slot, you can access the module menu.
●
To purchase a module and smart card, contact each service provider.
●
When the TV is turned on after inserting a CI Module, you may not have any video and
audio output in scrambled programme.
●
When using a CAM (Conditional Access Module), please make sure it meets fully the
requirements of either DVB-CI or CI plus.
●
An abnormal process of CAM (Conditional Access Module) may cause a bad picture.
●
If the TV does not display any video and audio when CI+ CAM is connected, please
contact to the Antenna/Cable/Satellite Service Operator. (Some models may not be
supported.)
●
While the TV supports paid broadcasting programmes based on the European standard
DVB-CI+, some programmes might not be available for watching if some operators of the
programmes use a proprietary CAS system.
●
If both PCMCIA type and USB type modules are inserted at the same time, the PCMCIA
type module will be used.
●
If another USB type module is also inserted while a USB type module is inserted, the
module that was inserted first will be used.
●
To Next Page
Loading...
Need help?
General
