Starting the engine for driving / switching it off
4.1 Starting the engine from the driver's cab
4 - 14 3 302 633 en Operating Instructions GMK5250L
27.09.2017
4.1.9 Start the engine
H
This section describes only how to start the engine from the driver's cab.
You can also start the engine:
– Starting with the hand-held control;
à p. 11 - 23,
– or from the outrigger controls;
à p. 11 - 23.
Refer to the separate operating instructions provided by the engine manu-
facturer for the operation of the engine. The engine can only be started if:
– The bridging plugs have been inserted in all sockets of the carrier and
superstructure for the hand-held control;
à p. 3 - 41.
– The lamp (1) has gone out (superstructure ignition off).
• Check that the vehicle parking brake is locked.
If the brake is engaged, the parking brake lever will point downwards.
• Switch the transmission to neutral position N; à p. 5 - 26.
Only in this shift position can the engine be started.
To Next Page
Need help?
General
