Rigging work
11.7 Outriggers – Overview – MAXbase slewing range type
11 - 32 3 302 633 en Operating Instructions GMK5250L
27.09.2017
Three / One
The outrigger width is the same for three out-
rigger beams and one outrigger beam is fully
retracted.
The overall width is entered once and an indi-
vidual width is entered once. For example
11.7.3 Enabled outrigger spans
Particular combinations are enabled for each type of outrigger span. This
section shows all enabled combinations with the associated individual
widths of the outrigger beams.
Symmetrical
The outrigger width is the same for all outrig-
ger beams. The table shows the permissible
combinations.
Front outrigger span 7.800 m (25.6 ft)
Rear outrigger span 3.900 + 1.355 m
(12.8 + 4.4 ft)
FL / FR / RL / RR (front left / front
right / rear left / rear right)
I
3.900 m (12.8 ft)
II
3.427 m (11.2 ft)
III
2.955 m (9.7 ft)
IV
2.155 m (7.1 ft)
To Next Page
Loading...
Need help?
General
