Rigging work
11.11 Other rigging work
Operating Instructions GMK5250L 3 302 633 en 11 - 141
27.09.2017
11.11.6 Step at the crane cab
You can control the stair tread via the outrigger control unit or via the
Settings menu in the crane control system.
H
You can only extend the step at the control unit when you are on the
operator side.
(A) – In the
Crane cab menu
Select extend/retract step as necessary – (6).
Extend
• Select and confirm the symbol (5) – the step
extends.
Retract
• Select and confirm the symbol (4) – the step
retracts.
(B) – At the outrigger control unit
Extend
• Press the buttons (1) and (3) – the step
extends.
Retract
• Press the buttons (1) and (2) – the step
retracts.
G
Risk of accidents by exceeding the permissible overall width!
Always retract the step for on-road driving.
When the step is extended, the overall width specified for on-road driving
is exceeded.
To Next Page
Loading...
Need help?
General
