Rigging work
11.8 Outrigger operation
Operating Instructions GMK5250L 3 302 633 en 11 - 37
27.09.2017
11.8 Outrigger operation
11.8.1 CHECKLIST: Extending the outriggers
H
This checklist is not a complete operating manual. There are accompanying
instructions, which are indicated by cross-references.
Observe the warnings and safety instructions there!
1. Level the truck crane with the level adjustment system and lower it as
far as possible;
à p. 5 - 52.
2. Switch off (lock) the suspension.
The symbol must be red (suspension off);
à p. 5 - 16.
3. Extend all outrigger beams to the required span;
–For the
Standard slewing range type; Ã Enabled outrigger spans,
p. 11 - 28.
–For the
MAXbase slewing range type; Ã Enabled outrigger spans,
p. 11 - 32
à Setting the spans, p. 11 - 42,
à Extending/retracting outrigger beams, p. 11 - 45.
4. Move the outrigger pads into the working position and secure them;
à p. 11 - 51.
s
G
Risk of crushing by extending outrigger beams!
You may only activate the outriggers if you yourself or a banksman with
whom you are in visual contact have an unobstructed view of their
movements.
To Next Page
Loading...
Need help?
General
