Starting the engine for driving / switching it off
4.3 Air intake inhibitor
Operating Instructions GMK5250L 3 302 633 en 4 - 23
27.09.2017
4.3 Air intake inhibitor
If the air intake inhibitor is triggered, a flap in the air intake line will close
and the engine will stop running. The air intake inhibitor is triggered,
– if an emergency stop switch is actuated or
– when the maximum permissible engine speed is exceeded. In this case,
the symbol (1) becomes red – at the
Warning display and in the Warning
submenu. The symbol stays red until the ignition has been switched off.
The engine can be restarted only after the air intake inhibitor has been
released.
Releasing the air
intake inhibitor
The following requirements must be met in order to release the air intake
inhibitor:
– The ignition must be switched off.
– The emergency stop switch must be reset.
The indicator (2) shows the current state of the
air intake inhibitor (1).
(A) – The indicator (2) is in the
closed position.
(B) – Turn the indicator (2) clockwise until it
engages in the
released position.
You can close the air intake inhibitor manually
with the lever (3).
To Next Page
Loading...
Need help?
General
