Crane operation
10.7 Working range limiter
10 - 142 3 302 633 en Operating Instructions GMK5250L
27.09.2017
10.7.5 Switching monitoring functions on/off
After turning on the ignition, all monitoring functions that were on before
the ignition was switched off are switched on.
H
When monitoring is switched on, the movement towards the shutdown
limit is continually reduced until reaching a standstill. The currently enabled
speed range is displayed visually;
à p. 10 - 132.
Select the symbol for switching the desired
monitoring on/off.
• Confirm the selection with button (5) or (6).
Monitoring display switched on/off
1 Slewing angle
2 Overall height
3 Working radius
4 Hoist rope travel limitation
7 Switch on
8 Switching off
Symbol red: Monitoring switched on
Symbol grey: Monitoring switched off
G
Danger of accident due to incorrectly set limit values!
After switching on the monitoring function, slowly approach all limits and
check that the system switches off in time.
If necessary, enter new values with larger safety distances.
To Next Page
Loading...
Need help?
General
