Rigging work
11.9 Rigging/unrigging the counterweight
11 - 90 3 302 633 en Operating Instructions GMK5250L
27.09.2017
• Move the slewing control lever in the dis-
played direction (1) or (2) – the automatic
mode continues.
– The superstructure turns into position (C).
– The lifting cylinders retract (D).
• Release the control lever.
Cancel automatic
mode
You can cancel the automatic mode any time.
• Press in the override button (1) – the automatic mode is cancelled.
If you have cancelled the automatic operation,
then you must:
In position (A)
• Fully retract the lifting cylinders – symbol (1).
In position (B)
• Turn the superstructure into position (A).
• Fully retract the lifting cylinders – symbol (1).
S
Risk of damage to the counterweight!
With the override switch actuated, the functions are always enabled.
Slew the superstructure only when the lifting cylinders are fully retracted.
To Next Page
Loading...
Need help?
General
