Malfunctions during crane operation
14.3 Warning and error messages
14 - 8 3 302 633 en Operating Instructions GMK5250L
27.09.2017
Acknowledge the error
Display symbol (1) – error can be acknowl-
edged.
Display symbol (2) – error cannot be acknowl-
edged.
• Select and confirm symbol (1) to acknowl-
edge the error.
If the error cannot be acknowledged, consult
Manitowoc Crane Care. First note the serial
number and programme version;
à p. 14 - 3.
Error message display
For each error the display shows:
– the error code (5),
– the symbols for
Exiting the menu
You can exit the error menu at any time via button (1) or (2).
If not all errors have been acknowledged then the symbol (1) is displayed
continuously.
When all errors are acknowledged, the symbol (1) goes out.
The buzzer tone sounds once and the symbol (1) flashes when an error
occurs.
1 the faulty component
2 the error type
3 the control unit which detected the
error
4 the index in the error group
To Next Page
Loading...
Need help?
General
