Manitowoc Grove RT9150E User Manual

3-79
RT9150E OPERATOR MANUAL OPERATING CONTROLS AND PROCEDURES
3
Published 2-23-2017, Control # 644-00
Grove
2
Enter outrigger
span, F2
• Start Input mode: press the F2
button (1) once, symbol turns green
• Input mode on: press either the F5
button or the F6 button once,
to bring up the next outrigger
configuration(2):
100%, full extend
50%, mid-extend.
Refer to Outrigger Deployment, page
3-82.
3
Enter swing range,
F3
• Start Input mode: press the F3
button (1) once, symbol turns green
• Input mode on: press either the F5
button or the F6 button once,
to bring up the next permissible
swing range (4):
(1) 360° swing range
(2) Working position 0° to the rear *
(3) Working position 180° to the
front *
* Swing gear must be off.
Refer to Swing Range, page 3-83.
4 Enter reeving, F4
• Start Input mode:
For main hoist: press the F4
button (4) until symbol (1) is green
For auxiliary hoist: press the F4
button (4) until symbol (2) is green
• Input mode on: press either the F5
button or the F6 button once:
To change reeving by one line (3)
and display the relevant maximum
load (5) for that reeving.
Refer to Entering the Reeving, page 3-
83.
5
Maximum load
display
Maximum load in tons (t) or kilo pounds
(klbs) for displayed RCL code.
Refer to the RCL Monitoring Submenu,
page 3-86 for more information.
Item Description Graphic Explanation
Reference Only

Manitowoc Grove RT9150E Specifications

General

Brand	Manitowoc
Model	Grove RT9150E
Category	Construction Equipment
Language	English