Manitowoc Grove RT9150E User Manual

OPERATING CONTROLS AND PROCEDURES RT9150E OPERATOR MANUAL
3-96
Published 2-23-2017, Control # 644-00
WORKING RANGE SUBMENU
This submenu displays the permissible working range (the
area under the curve) for the entered RCL code and the
telescope status of the current lift or you can have the
working range displayed for all permissible telescoping
statuses.
The curve (8) (Figure 3-98) displays the permissible working
range for the entered RCL code (1) and the telescope status
(6).
The working range ends at the maximum possible working
radius (B). Reduction of the working radius increases the
enabled load along the curve (8) up to the maximum possible
load (A). There has to be enough reeving for this load.
The maximum load (3) corresponds to the current reeving
(2).
The cross (9) indicates the position in the working range for
the current load (4) and the current working radius (5).
Opening the Submenu
In the lifting capacity submenu, press the F8 button (1)
(Figure 3-97) once.
Working Range Menu
Refer to the following table for a description of each item
listed above.
FIGURE 3-97
1
FIGURE 3-98
1
2
3
4
9
5
6
A
8
B
7
Item Description
1 RCL code display
2 Reeving display
3 Maximum load display
4 Current load display
5 Current working radius display
6 Telescope status display
7 Telescope status input buttons, F9-F13
8
Permissible working range display:
(A) Permissible load
(B) Permissible working radius
9 Current position display
Item Description Graphic Explanation
1 RCL code display RCL code, four digits.
2 Reeving display
(1) Required quantity of reeved ropes
for displayed, maximum load (2).
Reference Only

Manitowoc Grove RT9150E Specifications

General

Brand	Manitowoc
Model	Grove RT9150E
Category	Construction Equipment
Language	English