OPERATING CONTROLS AND PROCEDURES RT9150E OPERATOR MANUAL
3-24
Published 2-23-2017, Control # 644-00
6
Counterweight
Submenu, page 3-
49
Press the F6 button
to open the
submenu.
(1) Lock status; lift and locking
cylinders
(2) Pre-tensioning pressure status
(3) Lifting cylinders position
(4) Swing gear direction indicators
(5) Swing gear on/off indicator
(6) Position of superstructure from 0°
(7) Lock lift cylinders, F5
(8) Unlock lift cylinders, F6
(9) Retract lift cylinders, F7
(10)Extend lift cylinders, F8
(11) Extend lock cylinders, F13
(12)Retract lock cylinders, F14.
Refer to Counterweight Submenu,
page 3-49.
7
Outriggers
Submenu, page 3-
27
Press the F7 button
to open the
submenu.
(1) Outriggers display
(2) Swing gear indicator
(3) Parking brake indicator
(4) Four-wheel drive indicator
(5) Left front outrigger; on/off, F2
(6) Left side outriggers; on/off, F3
(7) Left rear outrigger; on/off, F4
(8) Right front outrigger; on/off, F6
(9) Right side outriggers; on/off, F7
(10)Right rear outrigger; on/off, F8
(11) Retract jack cylinder(s), F9
(12)Extend jack cylinder(s), F10
(13)Front outrigger cylinders; on/off,
F11
(14)
Rear outrigger cylinders; on/off, F12
(15)Retract outrigger beam(s), F13
(16)Extend outrigger beam(s), F14
Refer to Outriggers Submenu, page 3-
27.
Item Description Graphic Explanation
Reference Only