Features
24
A list of the models described in these
operating and installation instructions
can be found on the back page.
Data plate
The data plate located on the front
frame of the oven is visible when the
door is open.
The data plate states the model
number, the serial number as well as
connection data (voltage, frequency
and maximum rated load).
Have this information available if you
need to contact Miele so that any
issues can be rectified as quickly as
possible.
Items supplied
- Operating and installation
instructions for using the oven
- A cookbook with recipes for the
Automatic programmes and other
functions
- Food probe
- Screws for fixing the oven to the
housing unit
- Descaling tablets and a plastic tube
with suction cup for descaling the
steam injection system
- Various accessories
Accessories supplied and
available to order
Features will vary depending on
model.
The shelf runners, universal tray and
wire rack (or “rack” for short) are
supplied as standard with the oven.
Depending on the model, your oven
may also come supplied with some of
the accessories listed here.
All accessories and cleaning and care
products listed in these instructions are
designed for Miele ovens.
These are available to order via the
Miele online shop or directly from Miele
(see the end of this booklet for contact
details).
When ordering, please quote the model
number of your oven and the reference
number of the accessories required.
Shelf runners
Shelf runners for accessories are fitted
on either side of the oven cavity for
shelf levels.
The shelf level numbers are marked on
the front of the oven frame.
Each level consists of 2rails, one above
the other.
Accessories (e.g. the rack) are pushed
into the oven between the two rails.
The FlexiClip telescopic runners (if
present) are fitted on the lower rail.
The shelf runners can be removed (see
“Cleaning and care – Removing the
shelf runners with FlexiClip telescopic
runners”).
To Next Page
Loading...
Need help?
General
Weight and Dimensions
