Cleaning and care
97
Descale
The frequency of descaling will depend
on how often you use the Moisture Plus
function.
The descaling process can be run at
any time.
However, to ensure that the oven
functions correctly, you will be
automatically prompted to run the
descaling process for the steam
injection system after a certain number
of programmes.
The oven will count down in the display
the last 10 programmes that can be run
before it needs to be descaled. You will
then not be able to run any function or
Automatic programme using moisture.
These functions can only be used again
after you have carried out the descaling
process. All other functions and
Automatic programmes without
moisture can still be used.
Descaling process sequence
Once the descaling process has been
started it must be completed through
to the end. It cannot be cancelled.
The descaling process takes approx.
90minutes and consists of several
steps:
1. Preparing the descaling process
2. Drawing in the descaling solution
3. Activation phase
4. Rinse 1
5. Rinse 2
6. Rinse 3
7. Evaporating residual moisture
Preparing the descaling process
Risk of damage from spilt descaling
solution.
Sensitive surfaces and/or natural
floors can suffer damage.
Wipe up any spillages of descaling
agent immediately.
You will need a container of approx.
1litre capacity.
A plastic tube (with suction cup) is
supplied with your oven so that you
do not have to hold the container with
the descaling agent underneath the
water intake pipe.
We recommend using the descaling
tablets supplied. They have been
specially developed for Miele appliances
for optimum cleaning results.
Useful tip: Miele descaling tablets are
available to order from the Miele online
shop or directly from Miele.
Other descaling agents, which contain
other acids besides citric acid and/or
other undesirable substances, such as
chlorides, could cause damage.
Moreover, the descaling result
required cannot be guaranteed if the
descaling solution does not have the
appropriate concentration.
Fill the container with approx. 600ml
of cold tap water and thoroughly
dissolve one descaling tablet in it.
Starting the descaling process
Select Maintenance.
Select Descale.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
