Settings
45
The SuperVisionfunction cannot be
activated until the Miele@home system
has been set up.
SuperVision display
-
On
The SuperVisionfunction is switched on.
The symbol will appear in the top
right-hand corner of the display.
-
Off
The SuperVisionfunction is switched off.
Display standby
The SuperVisionfunction is also
available when the oven is in standby.
However, the time of day display must
be switched on (Settings| Time|
Display| On).
- On
Active domestic appliances that are
signed on to the Miele@home system
are always displayed.
- Only if there is a fault
Only faults on active domestic
appliances are displayed.
Appliance list
All household appliances signed on to
the Miele@home system are displayed.
Once you have selected an appliance,
you can access further settings:
- Display this appliance
– On
The SuperVisionfunction for this
appliance is switched on.
– Off
The SuperVisionfunction for this
appliance is switched off. The
appliance is still signed on to the
Miele@home system. Faults are
displayed, even if the
SuperVisionfunction for the
appliance has been switched off.
- Buzzer tones
You can select whether the buzzers
are switched on (On) or switched off
(Off) for this appliance.
RemoteUpdate
The RemoteUpdatemenu option is only
displayed and can only be selected if
the requirements for using
Miele@home have been met (see
“Before using for the first time –
Miele@home” or “Settings –
Miele@home”).
The RemoteUpdate function is used for
updating the software in your oven. If
an update is available for your oven, it
will automatically download it. Updates
will not be installed automatically. They
must be initiated manually.
If you do not install an update, you can
continue to use your oven as usual.
However, Miele recommends installing
updates.
Switching on/Switching off
RemoteUpdate is switched on as
standard. Available updates will be
downloaded automatically and will only
be installed if you initiate it.
Switch off RemoteUpdate if you do not
wish any updates to be downloaded.
Running a RemoteUpdate
Information about the content and
scope of an update is provided in the
Miele App.