Before using for the first time
31
Standard settings
The following settings must be made
before starting up for the first time. You
can change these settings again at a
later time (see “Settings”).
Risk of injury caused by hot
surfaces.
The oven gets hot during operation.
For safety reasons, the oven may
only be used when it has been fully
installed.
The oven will switch on automatically
when it is connected to the electricity
supply.
Setting the language
Select the language you want.
If you have accidentally selected a
language that you don't understand,
proceed as described in “Settings –
Language”.
Setting the location
Select the required location.
Setting up Miele@home
Set up Miele@home? appears in the
display.
To set up Miele@home immediately,
selectContinue.
To set it up at a later date, selectSkip.
See “Settings – Miele@home” for
information on setting up at a later
date.
To set up Miele@home immediately,
select the desired connection
method.
You will then be guided by the display
and the Miele App.
Setting the date
Set the day, month and year.
Confirm with OK.
Setting the time of day
Set the time of day in hours and
minutes.
Confirm with OK.
Completing the commissioning
process
Follow any further instructions in the
display.
The appliance is now ready for use.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
