Settings
39
- On
If you have also selected the Time|
Display| On or Night dimming setting,
the sensors and the proximity sensor
will also respond when the oven is
switched off.
- Off
Independently of the Time| Display
setting, the sensors and the proximity
sensor only respond when the oven
is switched on, as well as for a
certain amount of time after
switching it off.
Volume
Buzzer tones
If buzzers are switched on, a buzzer will
sound when the set temperature is
reached and at the end of a set time.
The volume of the buzzers is
represented by a segment bar.
-
Maximum volume
-
Buzzers are switched off
Keypad tone
The volume of the tone that sounds
each time you touch a sensor is
represented by a segment bar.
-
Maximum volume
-
Keypad tone is switched off
Welcome melody
The melody that sounds when you
touch the On/Off sensor can be
switched on or off.
Units
Temperature
You can set the temperature in degrees
Celsius (°C) or degrees Fahrenheit (°F).
Booster
The Boosterfunction is used to quickly
pre-heat the oven.
- On
The Booster function is automatically
switched on during the heating-up
phase of a cooking programme. The
top heat/grill element, ring heating
element and hot air fan pre-heat the
oven compartment to the desired
temperature at the same time.
- Off
The Booster function is switched off
during the heating-up phase of a
cooking programme. Only the heating
elements for the selected oven
function are used to pre-heat the
oven compartment.
You can also use the pull-down menu
to switch the Boosterfunction on or off
for a cooking programme.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
