Setup Menu System Interface
4 - 34 Operator’s Manual of Anesthesia System
4.7.7 Calibrate
Figure 4-36 Calibrate
Follow the prompts on the screen to calibrate the flow sensor. See (Pages 9-4) 9.3 "Flow Sensor
Calibration" for more information.
4.7.8 System
The [System] menu is accessible only by authorized administrative service personnel with password
access. The [System] menu can only be accessed in Standby mode.
NOTE: The authorized administrator should change the default password
immediately after the system is installed to prevent unauthorized
access to the System menu. The password may contain up to 30 digits
including numbers, letters (case sensitive) and special characters.
4.7.8.1 Calibrate
To Next Page
Loading...
Need help?
General
